Recipe: DIY Natural Face paint

Create your own colors and have fun with natural ingredients !

Ingredient list
Recipient: Small tank (250mL)
Choose the desired quantity : g
6.5 g
3.0 g
4.5 g
1.0 g

Containers to use:
3 x Stick (5g)
Cost: 2.15 € 2.15 EUR



180 days

2.15 €
Share the recipe
Video of the recipe


This lipstick is fully customizable: create your color! It can be poured in a mold to create a stick, or in a small pot. As this recipe does not contain water, it does not require a preservative.


Daily use. Keeps 6 months at ambient temperature.

Precautions before starting

Before starting, it is advisable to clean and disinfect the work surface and the utensils: the prepared products will go on the skin, it is therefore necessary to avoid any microbial contamination!

Thoroughly clean the BeautyMix. Then, soak a clean cloth in 70° alcohol (available in supermarkets) and use it to disinfect the BeautyMix tank and all the utensils. Let dry.

Clean the work surface and remove objects that could get in the way.

Place a clean paper towel on the work surface, and place the utensils on it. Have available: a clean teaspoon or spatula, and a clean, dry container for pouring the preparation once ready. Wash hands thoroughly.

Respect the dosages indicated for the ingredients of the recipe.
Need more information ? Consult the "Getting Started" page.
Thoroughly disinfect the work surface and the BeautyMix with 70° alcohol and a clean cloth.
Place the flat mixer in the BeautyMix bowl, and place the bowl on the scale. Perform the tare (zero) by pressing the T key. You can put your container (stick, jar or mould) in the fridge or freezer upstream, which will allow the balm to set immediately in the container when you pour it.
Weigh the required amount of cocoa butter.
6.5 g
Perform the tare (zero) by pressing the T key. Weigh the required amount of beeswax.
3.0 g
Perform the tare (zero) by pressing the T key. Weigh the required quantity of sweet almond oil (or hemp for a green color).
4.5 g
Place the tank on the BeautyMix, and press the button 3 times to start the red program.
Place the tank on the scale, positioning the tank lid between the scale platform and the tank, to prevent the heat from the tank from affecting the weighing. Weigh the required amount of pigment into the container. Mix lightly with the spatula.
1.0 g
Place the tank on the BeautyMix, and run the red program again to disperse the pigments well.
Transfer the mixture while it is still hot in a stick, pot or silicone mold, and place it in the refrigerator to harden for a few hours. Tip: you can also put it in the freezer for a few minutes and then put it in the fridge.
To clean your tank, rub the tank while it is still hot with a paper towel to eliminate as much excess product as possible. Reheat the tank with a hot program if necessary. Then clean by rubbing with soap.
And There you go !